The Future of Electric Cars in Australia Debate

An upcoming event: “The Future of Electric Cars in Australia” an Engineers Australia presentation by Ashley Sanders from Mitsubishi on Wednesday 13th March 6pm, in Newcastle has sparked a debate on electric vehicle design and cost.

Ballina based Hughes Group’s CEO Howie Hughes disagrees with Ashley Sanders comments on electric vehicle design. “Mr Sanders is coming at the problem of electric vehicles from entirely the wrong angle” said Howie. “We have taken a totally different approach in that we have designed and built a prototype electric vehicle based, firstly, on aviation design techniques and secondly, on what is practical to build in Australia given the initially small demand for energy efficient vehicles, products that will reduce carbon emissions.”

There are two issues here. Most people believe the jury is still out on global warming and it will not be until we have cyclones or these devastating floods every week, that there will be real action taken by Governments or private companies. By real action, Howie means actually producing products that make a real difference.

Secondly, to simply remove a petrol engine from a small car and replace it with an electric motor and batteries, is all but pointless in terms of reducing green house gas if the car is still charged from coal fired power. The design parameters Howie employs includes a totally different set of values which include anaerodynamic body for the vehicle, ultra light weight, regenerative breaking, a home based solar charging station, the elimination of many heavy and unnecessary mechanical bits and pieces and a totally different approach to styling and design. Of course, all this will be totally foreign to a company like Mitsubishi who do most of their design based on the opinions of focus groups and market research, Hughes Engineering, on the other hand, employs a more organic approach (that of  ”form follows function” ) where the end use of the vehicle has been permitted to define almost all of the design parameters.

The end result is what the company calls the Road-E, (see www.road-e.com.au)  a three wheel, two seat long range electric vehicle which is more of a cross between a light aircraft and a super hot motor bike.

The Road-E’s styling has yet to be fully developed however when in production, the vehicle will be a real head turner, unlike any other vehicle on the market and the price, even in limited production, about $30,000should cover this simple vehicle.

Hughes Engineering has been successfully producing 2, 4 and, in the near future,  6 seat light aircraft for the past 28 years.

The Road-E in construction The Future of Cars in Australia

The Roadie ~ Electric Car ~ Update

Our Roadie Electric Car has reached the point where its time to fit internals including seats dashboard etc.

Terry and Nick have so far done a great job however the seats the selection of seats was limited to those available from the larger after market automotive supplies and we found that these were all far too large to fit in to the Roadie.

At the same time we have always had a demand for a folding seat in the SP2000 and the SP4000. More so the SP4000 in other words a seat that fold forwards and allows access to the rear seat area for either baggage in the case of the two seater or people in the case of the four seater.

So some time ago we bit the bullet and started to develop fibreglass tooling for this seat. Terry made the first fibreglass mouldings and since then a couple of changes have been made resulting in a very neat pair of mouldings for the base and the back.

The seat flops forward as you would expect , its all been a bit a of a headache its all been very fun to develop this very complex piece of fibreglass tooling which consists of four fibreglass moulds.

More pictures on the way!

Love Soda Water? Save Plastic Bottles.

On collecting a 10-kilo carbon dioxide cylinder from our local BOC supplier the other day I did a quick calculation as to how many litres of fizzy water this cylinder would produce. A very interesting calculation as my guess is about a thousand dollars worth.

A bottle of soda water from a supermarket will set you back around two dollars a litre and at a guess 15 kilos of carbon dioxide at a cost of about 50 dollars makes each bottle worth just a few cents. But that’s not the point of this Great Green Idea, althought you can expect to save about a thousand dollars on your fizzy soft drinks you will also save hundreds of kilos in plastic bottles.

Overall you would have to have rocks in your head not to adopt this fantastic idea which is based on a simple soda stream refilling system combined  with a simple little fitting (Email us for more info) which allows you to refill  the soda stream bottles.

Even without this fitting your bottle of soda water will still only cost a fraction of the retail shelf cost from the retailer but if you refill your own CO2 bottles the cost is reduced to almost zero… Well to about 2 cents a litre.  Compared to two dollars a litre for off the shelf products.

Now that’s Great!

The ‘Roadie’ Electric Car Project develops……

Question:

So, what’s the Roadie all about and why is aircraft manufacturer, Australian LightWing, building a light weight 2 seat electric motor vehicle ?

ANSWERS:

Howie and Nick Hughes, backed up by long time Australian LightWing manufacturing engineer Terry Donaldson, are firmly of the opinion that the green revolution will be the dominant industry for this century. Anything- any process, product or service that saves, reduces or stores carbon will be a winner. BUT, as CEO Howie Hughes states, “that does not mean we believe all the  proposed or projected Climate Change doomsday scenarios. The Roadie is being developed primarily because of our companies dedication to efficiency in transportation in general, and in this case, road transport in particular, but also on the off chance  that the extreme predictions of climate change could just be real, we would like our company to be a leader, not a follower.”

At the time of writing, the Roadie is growing in the corner of the front factory. Anyone calling in will be made most welcome, to view the futuristic 2 seat vehicle and its associated drive train, suspension, Li-Iron batteries and tooling. Occasionally the Roadie has to take second place to aircraft manufacture, the companies core activity— check out www.lightwing.com.au .

Question:

Of course, 2 additional objectives of the project are to explore the possibility of electric power for aircraft use and also how do we make a “roadable” aircraft, that is, an aircraft that is capable of folding its wings and driving on the roads, this has been achieved in the US so why not here ?

Answer:

CEO Howie Hughes explains…. Its all about range, electric cars are all about getting the most energy out of a very small power supply. Compare the energy in a cup of petrol to even the best battery, weight for weight it’s a ratio of about 10 to one in favour of the cup of petrol. To have serious range, an electric car must be very light, like about half the weight of an average small car but it must also half the aerodynamic drag. Thinking about a car like the diesel Ford Focus, its propelled by an efficient diesel motor with a turbo etc.,  the car will produces on average 2 kg of carbon per 10 km. If you took this efficient diesel out and replaced it with lets say a 40kw electric motor, then the vehicle will produce a similar amount of carbon per kilometre if its batteries are charged from the Australian grid BUT if its owner also has solar or wind generation, then that car / owner can have carbon neutral  transport. The point is that because of its innovative design, the Roadie will use less energy and go a lot further at less overall cost.

Question:

So, when will the Roadie take its first drive ?

Answer

We are taking orders during 2012.  Expressions of interest only at this time,

Follow the Roadie’s progress on the net at www.lightwing.com.au call any time (02) 6686 8658

Or visit our factory at 176 Southern Cross Drive, Ballina Airport .

 

Just because its electric, doesn’t mean it has to be boring

 

You can view images of the  Roadie drawn using Maya movie making software created by Rex Forward. This shows the  front wheel covers and mud-guards with indicators mounted on top. Powerful LED type headlights, are mounted in the rear-view mirrors, these mirrors or their nacelle will also hold the pivot points for the doors which will hinge vertically up about this  point. The Roadie will have both a 100V DC power supply, but also a 12V dc supply for the vehicles electronics.

The Roadie features a toughened laminated glass windscreen.

The  Nose cone of the Roadie opens to allow the battery pack tray to slide in or out  through the tunnel that runs the full length of the passenger compartment. The 30 3.6V cells batteries can be swapped or simply removed for periodic service. The vehicle will be totally self contained, carrying its own charger.

The Range of the Roadie with one 10 kw hr pack is estimated to be between 130 and 160 kilometres but with 2 packs, it is expected to be 250 km. 240V charging will take about 6 hours from an exhausted pack and 2 hours using 415V, so, what makes the Roadie work.

 

Our CNC marching center uses Logitrol and Mac3 software to cut the various components for the Roadie and also produce the 3D shapes that have been used to fabricate the GRP molds for the Roadie’s unique aerodynamic light weight chassis, this machine center  and others where developed specifically to form a part of the  “organic engineering chain which we have perfected over the past 25 years and than has successfully developed about 10 unique aircraft designs.

A turbo diesel powered Roadie may be available in 2012, watch this space.

Like all the designs that have come from Hughes Engineering located at the Ballina Byron Gateway airport, these include about 10 different aircraft types including the latest super efficient carbon fibre SP-6000  6 seater, the Roadie has “evolved” through a unique process we call “Organic Engineering”. This process permits a rapid transition from concept to real product and we use the latest in PC software and computer aided CNC machining, sounds flash eh ?

Well its not, the CNC machine we built ourselves and cost no more than a few thousand dollars, the driving software is also very simple. We have leveraged the brain power of a unique group of students from Delft university in Holland, these students have been coming to Australia for the past 3 years to work on this project, we swap youthful enthusiasm and  knowledge , giving back hands on design expertise and training in our companies unique brand on “Organic Engineering” it’s a great trade-off.

 

Li-Iron Batteries.

30 of these lightweight (2.5 kg) batteries will provide the Roadies power train with 10 kw hours, enough with average use, to power the vehicle for up to 3 hours depending on use, regenerative braking will be tested soon using an AC brushless motor of similar power.

The Roadie project has many unique attributes, its teardrop or tadpole shape comes from nature, Design cad, a $100 drawing program is used  with other more sophisticated cad programs, to generate the body profiles while a US bunch of hardware and software cuts most of the components.

The Roadie is predicted to travel 135 km  to 165km using 5 – 8 kw hrs of electricity, this will result in the Roadie generating 0.5 kg of carbon per 10 km. This is a saving compared to a diesel car of about 400%. The downside is that the Roadie has only 2 or 3 seats whereas a diesel motorcar can have up to 5 seats, however diesel is hard for a city dweller to manufacture whereas electricity can easily be generated from solar panels on the roof or from the wind.

If the Roadie is charged from a home solar charging plant, the carbon contribution will be almost zero except for the carbon created in maintaining the vehicle, its manufacture and final recycling.

 

So why is the Roadie 4 times more efficient  than its diesel counterpart  ?

The answer is easy, the Roadie weighs half the weight of a normal car (estimated 400 kg),  the rolling resistance is proportional to the weight, also the Roadie  ie  has less than half the aerodynamic drag of a normal car….

Result = Roadie efficiency = x 4 that of a normal 4 seat car.

On a per seat basis, efficiency is a little less.

The Roadie will have some limitations with its range of lets say 150 km to 250 km (with 2 battery packs). The Roadie will  not tow your boat to the boat ramp on the weekend and unless you swap batteries, it will not be ideally suited to interstate driving BUT it will be perfectly suited to driving to and from work with range to spare,  weekend driving on return trips of 150 to 250 km and town deliveries where charging is available en-route, perfect !

 

 

FAQ’s

Q. Why doesn’t adding twice the batteries simply double the range ?

A….the battery pack weighs about 90 kg so 2 packs weigh 180 kg and unfortunately, the batteries don’t burn off weight as does power from fossil fuel so the vehicle is heavier.

Q … what is the cost of an extra battery pack?

A.. About $4,500. at present rates, this can be expected to drop as battery  efficiency improves and more people drive electric cars.

Q… what will be the projected cost of the Roadie?

A… Unknown at this stage, motor cars are one of the cheapest consumer items available with a per kg cost as low as $10 per kg, good steak costs more than this but we estimate the Roadie will be available for less than $30,000

Q …Why 3 wheels ?

A… by removing a wheel from the rear end, we remove about 200 kg from the vehicle weight, weight and aerodynamic drag are critical factors in determining the efficiency of an electric vehicle. If the Roadie had 4 wheels its weight would increase to about 600 to 700 kg with a substantial reduction in range.

Q… what about stability with 3 wheels compared to 4 ?

A… if your worried about stability, Google T-Rex 3 wheel car 5th gear. On this site you will see the 5th gear team flogging the 3 wheel T-Rex around their airport in the UK, now this vehicle is a little different to the Roadie in that it has a 200 hp motorcycle engine, not a 10 kw electric engine but the design and handling will be the same, no problems with stability at all because the Roadie has a very low centre of gravity and low aerodynamic drag.

Q… what about noise ?

A.. Most noise in a normal car comes from forcing air between the underside of the car (which is usually a horror show in terms of pipes, chassis parts etc) and the road, causing huge amounts of aerodynamic drag and noise. In this area, the Roadie is clean, clean, clean ie very clean so little noise is expected at all. Cities populated by Roadie type vehicles would be way nicer places to live particularly near freeways.

Q.. How fast will the Roadie be off the mark and what will be the top speed ?

A….The DC motor has maximum power at zero revolutions so it will have excellent acceleration aided by its light weight, top speed will be about 100 km /hr

Q… how much room is there in the rear compartment ?

A… enough for a couple of children, shopping or  a set of golf clubs.

The Roadie drive train is shown above, its so simple and light.

A 10 kw DC motor is coupled to a BMW rear bike swing axle. 

This rear axle has been chosen because of its one sided rear wheel mount. Remember, the Roadie is part motor bike and part car so changing a tyre must be made easy. All the Roadie wheels are the same and a spare wheel will also be carried in the rear compartment along with a small  jack, wheel brace etc.

All the suspension will feature spring over shocks which are Australian made and adjustable and yes, the Roadie could go off road with minor modifications, just imagine a totally eco-friendly car rally with no noise pollution whatsoever !

A loan wind generator stands on the ridge line behind our town of Lennox Head and we have talked at length with the owner of this relatively small (diam about 10m) wind generator, it was imported from Europe and is ideally suited to home ownership, it is quiet and very efficient and provides more than enough power to run  both a home and a car like the Roadie, the price tag is close to $75k however, its for this reason Hughes Engineering is  developing its own wind generator based on the iconic Comet or Southern Cross windmill, this 2 to 3 KW unit will be available for less than $10k . We project / hope.. our gene  will also find a market in 3rd world countries also.

Organic Waste Collection Services….

I have just received a super friendly and slightly confusing letter from my local council, stating our area is going to start an organics and garden waste collection service because our local dump is quickly filling, and we need to do something about it.

I agree.

I am very glad that this service will be starting up. I guess….

However,

The letter states the service will cost $360 whether I request to have 1 bin, or 6 bins for waste collection each week.

I would like to suggest to any other residential dweller in the area, instead of spending that quarterly $360.00, on and on for the rest of our lives, to hop on down to the local hardware store and invest in a worm farm and a composter. And never throw out anything organic ever again.

Worms eat just about anything and everything, and the things the don’t (onion peel, citrus rind, garlic) and all your garden waste- goes into the composter.

My garden is SMALL – it’s about 10 paces across and 4 paces wide.

In that space I recycle, compost, tend to my worms, grow eggplant, basil, parsley, strawberries, lettuce and lemongrass.

Why pay for the Council to take away something that can grow your food? Gives nutrients to your soil? Give nutrients to your soul?

I understand that restaurants throw away so much food, and I wonder why that is so easily excused?

Why not have that alley way down the back made into a herb garden?

Is it really too hard?

Really?

I would like to thank Hungry Beast on the ABC, for another golden piece of information that keeps me motivated….

“A quarter of the food wasted in the first world could feed all the people starving in the Third World.”*

http://hungrybeast.abc.net.au/episodes/episode-2

Carbon Emissions= Water Levels Rise.

In the application for a building permit, I recently visited the  website titled:

Richmond River Flood Plain Management Study, 2010“*.

In this study our city fathers, or the NSW government, presumably under the management of our previous leader, is using as a basis for planning, that by the middle of this century ocean levels will have risen by  approximately half a meter and by the end of this century, the study predicts a rise of one meter.

This is bad enough in itself but also adding two things: this has not been widely published and secondly, it is being used as a basis for council town planning for future coastal subdivisions into the future. This is ludicrous.

I believe quite firmly that a build up in carbon dioxide in the atmosphere is a bad thing and I believe it should become every business’s and individuals priority to address this problem, in both their business activities and their daily lives. That is: a reduction in the amount of carbon output that we all generate, however – I don’t believe that  such a build up will result in such an outrageous rise in ocean levels.

If this prediction, however, is correct, and it is based on irrefutable data, then the fact that our government  is keeping it tucked away in insignificant reports, such as this one, defies comprehension. If ocean levels are to rise by one meter, the consequences for life as we know it, on the East Coast of Australia, in  particular, will be catastrophic.

Major storm surge protection will be required in the form of Holland style engineering dykes; storm surge gates will be required on all of the rivers on the east coast, and in general terms, if we don’t start planning, real engineering solutions to this NOW, we, or our children, and their children’s children, are going to be severely  compromised, and will not enjoy the lifestyle that us baby boomers have enjoyed over  our lifetimes.

Far more importantly, is the emphasis that must be placed on reducing the amount of carbon production by every single person.

We believe that the solution to possible climate change problems in the future, is in individual companies developing innovative products and services that are carbon neutral or assist in the removal of carbon from our atmosphere.

Designing future coastal subdivisions will not be of any use, if they are simply underwater. Engineering storm surges gates may be a good option. But reducing each and every persons carbon emissions has by far more positive outcomes.

Flood predictions of The Northern Rivers. NSW Australia

* http://rrcc.nsw.gov.au/

A Good Idea Gone Wrong.

Nothing infuriates me more than a good idea gone horribly wrong.

And as I see the current generation of electric motor vehicles coming on to the market, it fills me with absolute horror that this is one idea which is literally driving itself straight off the rails.

To me, the entire concept of having electric motor vehicles is to:

Save the  environment;

Save carbon; and

Save on noise and air pollution in our cities.

However, if you simply remove the petrol engine from a standard motor vehicle and replace  it with an electric motor and batteries there is almost no saving to the environment whatsoever as the electricity, particularly in the case of Australia,  is still being generated by filthy coal powered stations.

Cars on the road today are aerodynamic nightmares. It’s like driving a brick. Look out your window – you’ll see bricks with wheels. Heavy, angular, made-out-of-the-heaviest-materials BRICKS. This is justified by the term “safety”. You want a big, strong, heavy car around you in case of accidents and mishaps yeah? So, don’t get us wrong, we, in NO WAY, mean to backseat the complete requirement of safety in vehicles, (and this argument is supported by our award winning, safest aircraft in Australia – Australian LightWing Aircraft)  – but safety does not have to be the expense of efficiency.

If we, as a society, are desperately trying to reduce carbon emissions, we need to stop expelling exorbitant amounts of energy to push “bricks” around, and instead, use just the energy required to propel extremely safe, and extremely aerodynamic vehicles.

How is this possible? Don’t look at bricks. Look to light and safe, well designed aircraft.

Our concept with ‘The Roadie‘ is to create a super light weight and extremely aerodynamic vehicle which is efficient both in terms of its aerodynamics and its power usage, therefor cutting emissions drastically — by hopefully up to 70 to 80 percent, using electric power for  the vehicles propulsion .

Your complete safety is provided by the lightweight, quality, structurally tested, welded, aircraft-grade, chrome moly steel AERODYNAMIC safety frame that encloses the driver and passengers in a protective cocoon.

To conduct a totally Green Car Rally would in my opinion be the ultimate achievement in this region (The Northern Rivers of New South Wales – Australia) and I would  hope that all of those that have opposed the ‘Speed on Tweed Classic Car Race‘ would welcome, with open arms, a car rally held using super quiet, clean, electric cars powered on the basis of having negative or zero carbon impact on the environment.

The Roadie:

Designed By Australian LightWing.

http://www.lightwing.com.au

http://www.lightwing.com.au/roadie.html